can the maxisys 905 program new imobilizer on chevy hhr
2512 Views 1 Replies Latest reply: 2014-05-27 23:22:09
-
Level 6
(475) points
hello we got a 2008 chevy hhr towed in someone tryed to steal the car and ripped the ignition switch and housing and imobilizer apart. we got a used steering column from the junk yard. i installed the new column. did the 10 minute relearn now the car cranks and starts but wont run. does the new imobilizer have to be programed to the body computer and the ecm. can the 905 read and send the new fuel pass word to the bcm or ecm -
Level 10
(7890) points
Usually the 3-10 takes care of it i hardly ever do the 3-10 i usually i do the vtd on line
much faster and it always work but that will require a passthru,tech2,mdi and a sub on
tisweb but try it again first erase all vtd codes then try this key on for 10 minutes and
30 seconds key off for 30 seconds do this 3 times after the third time do not start the
engine turn key off wait 30 seconds then start the car it should remain running this
procedure is for usa gm vehicles if no go post your trouble codes bcm codes good
luck.
1
Total1 Pages
- Related links
-
Top users
-
Online users
-
Search Communities